ORANGE PI R1 – TINY BOARD WITHTWO NETWORK INTERFACE
Introducing the new Orange Pi tiny Hacker Board – Orange Pi R1 with dimensions 60mm x 45mm that runs Linux or Android on a quad -A7 Allwinner H2 and features WiFi, USB OTG, and it provides a dual 10/100 Ethernet ports for network connectivity.
Orange Pi has come out with so many Single Board Computers focusing on IOT development. A few months ago, the revealed Orange pi 2G-IoT that have an 802.11n Wi-Fi and Bluetooth 2.1 at the same time it provides a 2G Mobile Radio for cellular connectivity.
Now they have come up with another Single Board Computer that have WiFi, USB OTG and ‘TWO’ 10/100 Ethernet ports. Behold The Orange Pi R1. It’s an open-source single-board computer. It can run Android 4.4, Ubuntu, Debian. It uses the AllWinner H5 SoC, and has 256MB DDR3 SDRAM.
|CPU||H2 Quad-core 32-bit Cortex-A7|
|GPU||Mali400MP2 GPU @600MHz, Supports OpenGL ES 2.0|
|Memory (SDRAM)||256MB DDR3 (shared with GPU)|
|Onboard Storage||TF card (Max. 32GB) / Spi flash(16MB)|
|Onboard WIFI||Realtek RTL8189FTV, IEEE 802.11 b/g/n|
|Onboard Network||100M/10M Ethernet RJ45(Onboard Ethernet)100M/10M Ethernet RJ45(RTL8152B)|
|Video Outputs||Supports external board via 13pins|
|Power Source||USB OTG can supply power|
|GPIO(1×3) pin||UART, ground.|
|Low-level peripherals||26 Pins Header, compatible with Raspberry Pi B+13 Pins Header, with 2x USB, IR pin, AUDIO(MIC, AV)|
|LED||Power led & Status led|
|Supported OS||Android4.4, Lubuntu, Debian, Armbian Image|
|Product size||45 mm × 60mm|
The system doesn’t have a a DisplayPort, VGA, or HDMI port, but there is an LCD connector that you can use to hook up an external screen.